DigitaLinx DL-HD2100 Panduan Pemilik - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pemanjang DigitaLinx DL-HD2100. DigitaLinx DL-HD2100 17 halaman. Hdbaset extender set
Juga untuk DigitaLinx DL-HD2100: Panduan Pemasangan Cepat (8 halaman), Panduan Pemasangan Cepat (8 halaman)
Halaman Cetak
DL-HD2100 Owners Manual
The DigitaLinx DL-HD2100 HDBaseT extender set extends HDMI audio, video as well as control up to 100m / 330'
using a single Category 6 cable. Supports HDMI 2.0a, HDR10 and HDCP 2.2 as well as Dolby Atmos and DTS:X
audio formats. Control extension supports bidirectional IR, Ethernet, ARC and RS232. Built in re-clocking circuitry
ensures that extender set is backwards compatible with older HDMI version chip sets.
The DigitaLinx DL-HD2100 can transport HDMI data rates up to 18Gbps up to 100 meters. The system enables
high data rates by utilizing visual lossless compression at a 2:1 data compression rate when the signal surpasses
10Gbps, anything under 10Gbps will never be compressed. Supports static HDR (HDR10) only when data rate
exceeds 18Gbps, supports dynamic HDR (HDR10+ / Dolby Vision) when data rate is 10Gbps or less.
Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design
allows the units to be powered at either the TX or RX end, and only one power supply is required to power the
set. The 12 volt power supply is secured with a screw-on connector to prevent the power from being accidentally
disconnected.
The DL-HD2100 is sold only as a set. The individual transmitter and receiver are not compatible with other
HDBaseT devices due to proprietary PoE circuitry.
• (1) DL-HD2100 Transmitter and Receiver Set
• (2) IR Receivers (Eye)
• (2) IR Transmitters (Emitter)
• (1) IR-AC IR Coupler Cable
• (3) 3 pole Terminal Block (attached to extenders)
• (1) DC12v US Power Supply with US, UK, EU and AU adapters
• (4) Mounting Brackets with screws
4