DigitaLinx DL-HD70LSIR Panduan Pemilik - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pemanjang DigitaLinx DL-HD70LSIR. DigitaLinx DL-HD70LSIR 13 halaman.
Juga untuk DigitaLinx DL-HD70LSIR: Panduan Pemasangan Cepat (8 halaman)
Halaman Cetak
DL-HD70LSIR Owners Manual
Quick Start
1.
Connect video source to transmitter HDMI IN
2.
Connect display technology to receiver HDMI OUT
3.
Connect transmitter and receiver together with a shielded Category 6 cable
4.
Connect IR control (optional)
5.
Apply power to either transmitter OR receiver to power entire circuit
Connecting a Video Source
HDMI Input (Transmitter)
Connect an HDMI source device to the HDMI input on the DL-HD70LSIR transmitter labeled HDMI IN using an
HDMI cable that is less than or equal to 5 meters in total length. For HDMI source devices that are further away,
an active HDMI cable may be required to complete the connection.
Connecting a Display
HDMI Output (Receiver)
Connect the display to the HDMI output on the DL-HD70LSIR receiver labeled HDMI OUT using an HDMI cable
that is less than or equal to 5 meters in length. It is recommended to keep the DL-HD70LSIR receiver near
the display input as it is not recommended that an active HDMI cable be used on the HDMI output on the
DL-HD70LSIR receiver.
6