DigitaLinx DL-HD70LSIR Panduan Pemasangan Cepat - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pemasangan Cepat untuk Pemanjang DigitaLinx DL-HD70LSIR. DigitaLinx DL-HD70LSIR 8 halaman.
Juga untuk DigitaLinx DL-HD70LSIR: Panduan Pemilik (13 halaman)
Halaman Cetak
Cabling Wiring Requirements
HDBaseT Cabling
To ensure proper performance of the DL-HD70LSIR, it is recommended that you use solid
core, shielded Category 6 F/UTP cabling at a minimum. Category 5e F/UTP may perform
well but may not support power over HDBaseT reliably over longer distances.
For opti mized HDBaseT performance use the following Liberty Wire and Cable branded
cabling;
Category 6 plenum; 24-4P-P-L6SH
Category 6A plenum; 24-4P-P-L6ASH
Category 6 NON-plenum; 24-4P-L6SH
Category 6A NON -plenum; 24-4P-L6ASH
When using shielded category cabling ALWAYS...
....use shielded connectors
....properly ground the category cable
Twisted Pair Wiring
Use TIA/EIA-568B wiring for Category 6
connecti on between send and receive
units.
DL-HD70LSIR Quick Guide
5