DigitaLinx DL-HDFO Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemanjang DigitaLinx DL-HDFO. DigitaLinx DL-HDFO 13 halaman. Fiber optic extender

FCC/CE Statement for regulations of Electro-magnetic emissions

This device complies with part 15 of FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation. This equipment has

been tested and found to comply with the limits for a Class B digital device

pursuant to part 15 and 2 of FCC Rules, EN 55022/55024/61000-3 for CE

certification. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy. If the device is not installed and used in accordance with the

instruction guide it may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment on

and off, the user is encouraged t try to correct the interference by one or more

of the following:

• Re-orient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult a service representative for help.

Properly shielded and grounded cables and connectors must be used in

order to comply with FCC/CE emission limits. Changes or modifications not

expressly approved by the party responsible for compliance could void the

user's authority to operate the equipment.

Certification for Safety

The extension system is certified pursuant to IEC60065 and its AC/DC power

adapter is certified by UL310, 1950, 60950 for North America, c(UL) or CSA for

Canada, TUV-CE & GS for the EU and PSE for Japan.

Certification for Eye Safety

This laser product is implemented by using 850nm VCSEL (Vertical Cavity

Surface Emitting Laser) Transceivers manufactured by RTCom Co. Ltd which is

certified by CDRH/FDA referred in Accession Number 0210774 as classified in

Laser Class 1.

Welcome and Safety Notes

1-3