Cisco aironet 1524SB Adendum Manual Perangkat Keras - Halaman 11

Jelajahi secara online atau unduh pdf Adendum Manual Perangkat Keras untuk Titik Akses Nirkabel Cisco aironet 1524SB. Cisco aironet 1524SB 15 halaman. Outdoor mesh access point

Halaman Cetak

Interpreting the LEDs

The access point LEDs are identified in
Figure 4
1
2
The access point LED signals are listed in
Table 3
Access Point LED Signals
1, 2
LED
Color
Status
Off
Green
Blinking green
Amber
Blinking amber
Blinking red/green/amber
Red
Uplink
Off
Green
OL-19762-01
Access Point LEDs
Status LED—access point and software status 3
Uplink LED—Ethernet, cable, or fiber access 4
Cisco Aironet 1524SB Outdoor Mesh Access Point Hardware Addendum
Figure
4.
RF-1 LED—status of the radio in slot 0
(2.4-GHz) and slot 2 (5.8-GHz)
RF-2 LED—status of the radio in slot 1
(5.8-GHz). The slot 3 (5.8-GHz) radio is
disabled for this project phase.
Table
3.
Meaning
–
Access point is operational.
Download or upgrade of Cisco IOS image file in progress.
Mesh neighbor access point discovery in progress.
Mesh authentication in progress.
LWAPP discovery in progress.
Firmware failure. Contact your support organization for assistance.
No physical connector present or the uplink port is not operational.
Uplink network is operational (cable, fiber optic, or Ethernet).
11