ACU-RITE 00439DI Buku Petunjuk - Halaman 14

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Stasiun Cuaca ACU-RITE 00439DI. ACU-RITE 00439DI 20 halaman.

Troubleshooting

Problem

Inaccurate

temperature or

humidity

Inaccurate wind

readings

Display screen

not working

Inaccurate barometric

pressure

The unit lost power

or batteries were

changed and the

time is not correct

If your AcuRite product does not operate properly after trying

the troubleshooting steps, visit www.AcuRite.com or call

(877) 221-1252 for assistance.

• Make sure both the display unit and 3-in-1 sensor are

placed away from any heat sources or vents (see page 9).

• Make sure both units are positioned away from moisture

sources (see page 9).

• Make sure 3-in-1 sensor is mounted at least 5 ft off of

the ground.

• Calibrate indoor and outdoor temperature and humidity

(see page 15).

• What is wind reading being compared to? Pro weather

stations are typically mounted at 30 ft high or more. Make

sure to compare data using a sensor positioned at the

same mounting height.

• Check location of the sensor. Ensure it's mounted a

minimum of 5 ft in the air with no obstructions around it

(within several feet).

• Ensure wind cups are spinning freely. If they hesitate or stop

try lubricating with graphite powder or spray lubricant.

• Check that the batteries are installed correctly.

Batteries may need to be replaced.

• Reset the display by pressing the RESET button, located on

the back of the display unit in the battery compartment.

Date and time will need to be entered after a reset.

It may take up to 14 days for the pressure to calibrate to

your location.

The Intelli-Time battery needs to be replaced

(see page 16). Once the new battery is installed,

time and date will need to be set manually.

Possible Solution