DigitaLinx DL-AS31-1H1DP1V Panduan Instalasi - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih DigitaLinx DL-AS31-1H1DP1V. DigitaLinx DL-AS31-1H1DP1V 13 halaman.
Halaman Cetak
Source Select Contact Closure Wiring
With AUTO and GND shorted, the DL-AS31 will automatically switch to the next active
input. Momentary contact closure connections will manually switch the source input.
Automatic Switching:
AUTO
DP
GND
HDMI
Automatic Switching:
To enable automatic switching, place a jumper between the Gnd and Auto connections
on the Source Select Contact Closures. When in auto-switch mode, the DL-AS31 will
switch according to the following rules:
New Input: Upon detecting a new input, the switcher will automatically select the new
input.
Reboot: Once power is restored to the switcher, it will automatically reconnect the
active input. If all inputs are active, it will switch to the HDMI input.
Source Removed: When an active source is removed, the DL-AS31 will switch to the first
available active input.
Manual Switching:
To enable manual switching, select the input of the DL-AS31 by using one of the
following methods:
Contact Closure: Make a contact closure between the desired source and GND contacts.
RS232: Transmit the
Manual Switching:
AUTO
GND
VGA
Input Selection
SET HDMI
SET DP
,
DP
HDMI
VGA
SET VGA
or
RS232 commands.
Automatic Switching
with Manual Override
AUTO
DP
GND
HDMI
VGA