DigitaLinx DL-AS61 Panduan Instalasi - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih DigitaLinx DL-AS61. DigitaLinx DL-AS61 9 halaman.
Halaman Cetak1.
Verify all components included with the product are present before installation.
2.
Turn off power and disconnect the audio/video equipment by following the
manufacturer's instructions.
3.
Connect an HDMI cable between the digital source and an available input on the
DL-AS61.
4.
Connect a VGA cable between the analog source and an available input on the
DL-AS61.
5.
Connect an audio cable with 3.5 mm end between the analog source and the
corresponding VGA input. Audio will not pass without a video signal present.
6.
Connect an HDMI cable between the display and the HDMI output of the DL-AS61.
7.
Connect the appropriate audio output cable to any of the available audio output
ports of the DL-AS61.
8.
Connect the included RS232 cable between a control device and the RS232 port of
the DL-AS61.
9.
Connect the included IR receiver to the IR In port of the device.
10. Connect the included power supply to the DL-AS61 and lock the power supply to
the power connector by twisting the locking collar clockwise.
11. Power on all audio/video devices.
Manual Switching:
When the DL-AS61 is in manual switching mode, the Auto Mode LED will be dark. To
change inputs, press either the previous or next button.
Automatic Switching:
To enable automatic switching, press the Previous/Auto button for three seconds. The
Auto Mode LED will light.
When in auto-switch mode, the DL-AS61 will switch according to the following rules:
New Input: Upon detecting a new input, the switcher will automatically select the new
input.
Reboot: Once power is restored to the switcher, it will automatically reconnect the
input before powered off.
Source Removed: When an active source is removed, the DL-AS61 will switch to the first
available active input starting at HDMI Input 1.