Argent Data Systems ADS-SR1 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengulang Argent Data Systems ADS-SR1. Argent Data Systems ADS-SR1 20 halaman. Simplex repeater

Halaman Cetak

Hardware Description

The ADS-SR1 measures 3.6" by 2.6" by 1.1" (92mm by 66mm by 28 mm). Its

front panel has a pushbutton power switch, 2.1x5.5mm center-positive DC power

jack, and an RJ45 jack for all radio connections. Two LEDs (one red and one

green) on the RJ45 jack indicate activity. A removable panel on the back of the

unit provides access to the battery compartment and DIP switches. Setting the

DIP switches may require a small object like a paperclip or pin. These switches

select the PTT mode and audio output range, and allow the device to be reset to

its default settings.

Power is supplied by internal batteries, through the DC power jack, or through

the RJ45 jack.

Installing Batteries

The ADS-SR1 accepts two AA (LR6) size batteries. Use fresh alkaline or lithium

batteries, and pay close attention to battery polarity. Do not install batteries if

the unit is being powered through the RJ45 jack!

Do not store the unit for long periods with alkaline batteries installed. If long-

term storage is required, use premium grade lithium batteries (e.g., Energizer

Lithium) and inspect them periodically. Lithium batteries provide significantly

longer operating life for the unit and can be stored for longer periods of time.

Because the ADS-SR1 may be stored in your emergency kit for years without

being used, lithium batteries are highly recommended to ensure that the unit will

work when it's needed.