argenta APE 800 Panduan Pengoperasian dan Pemeliharaan - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Pemeliharaan untuk Tungku argenta APE 800. argenta APE 800 16 halaman. Burn-out furnaces

Halaman Cetak
Burn-out furnace APE800 and APE800a
Temperature verge in section 5.
Holding the temperature from the previous section.
The value describing the temperature from the previous section
holding time.
The section in which the furnace chamber is cooled down.
The cooling verge of the casting temperature.
Holding the temperature from the previous section.
The time of sustaining the casting temperature, which
enables making the cast.
Setting the 0 values in both boxes indicates the end of the
programme.
In order to come back to the main box, which enables to start
the programme, press the

8.3. Launching the programme without a delay

In order to start the previously entered programme immediately, one has to follow
the undermentioned instruction.
sign
description
Turn on the power supply with the knob at the front of the temperature driver and wait
0
a moment till the box below appears.
1
This screen shows the current temperature in the furnace chamber. The temperature
must not be higher than 150
The programme is immediately started and it is carried out from the first section.
choose
choose
choose
choose
choose
key twice
Programme no. 1 has been saved.
o
C.
to start programme no. 1 press the following key
to start programme no. 2 press the following key
*the analogous situation concerns programme no. 2
and press
choose
and press
and press
and press
and press
choose
and press
and press
choose
and press
.
2008-06-18
730
0-800
o
[
C]
0
0÷10
o
[
C/min]
240
0÷1000
[min]
10
0÷10
o
[
C/min]
630
0-800
o
[
C]
0
0÷10
o
[
C/min]
360
0÷1000
[min]
0
0÷10
o
[
C/min]
360
0÷1000
[min]
12