Cisco Aironet 600 Series Panduan Pengguna - Halaman 30
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Titik Akses Nirkabel Cisco Aironet 600 Series. Cisco Aironet 600 Series 44 halaman. Officeextend access point
Juga untuk Cisco Aironet 600 Series: Panduan Konfigurasi (4 halaman)
Halaman Cetak
Configuring Radio Channels on the Access Point
Configuring Radio Channels on the Access Point
Follow these steps to configure a radio channel for your 600 Series OfficeExtend access point.
Step 1
Access the 600 Series OfficeExtend access point GUI as described in
page
Click the Configuration tab.
Step 2
The Configuration–System page is displayed.
Step 3
From the Radio Interface drop-down list, choose the desired radio interface, which can be either
2.4 GHz or 5 GHz.
From the Status drop-down list, choose Enabled to enable the wireless interface.
Step 4
From the Channel Selection drop-down list, choose the channel on which this interface will operate.
Step 5
Note
Click Apply to commit your changes.
Step 6
Cisco Aironet 600 Series OfficeExtend Access Point User Guide
3-2
2-1.
802.11n mode should be enabled by default. If it is disabled, choose Enabled from the
802.11 n-mode drop-down list.
Chapter 3
Configuring the Access Point
"Accessing the GUI" section on
OL-29882-03