ARGENTO ELEPHANT Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sepeda ARGENTO ELEPHANT. ARGENTO ELEPHANT 20 halaman. Epac bicycle electrical pedal-assisted cycle
Halaman Cetak
- Avoid uneven surfaces and obstacles.
- Drive with both hands on the handlebar.
- Replace worn and / or damaged parts, check that the protections are working
properly before use.
2.4 Maintenance warnings
All maintenance operations must take place with the battery disconnected.
During each maintenance phase, operators must be equipped with the necessary
accident prevention equipment.
The tools used for maintenance must be suitable and of good quality.
Do not use gasoline or flammable solvents as detergents, but always use non-
flammable and non-toxic solvents.
Limit the use of compressed air as much as possible (max 2 bar) and protect
yourself with glasses with side shields.
Never resort to the use of open flames as a means of lighting when carrying out
verification or maintenance operations.
After any maintenance or adjustment, make sure that no tools or foreign bodies
remain between the moving parts of the pedal-assisted bicycle.
Use only original ARGENTO spare parts.
Any liability of the manufacturer for damage or loss of functionality caused
as a result of using non-original accessories and parts is excluded.
2.5 Other provisions
The first thing to do when starting to use is to check the presence and integrity of
the protections and the functioning of the safety devices.
If you find any defect, do not use the pedal-assisted bicycle!
It is strictly forbidden, therefore, to modify or remove the guards of the
battery, the chain, etc. warning and identification plates.
2.6 Warehouse deposit
In the event that the pedal-assisted bicycle should be stored and kept for long
periods of inactivity, the following operations must be carried out:
- Repair it in a dry and ventilated place.
- Carry out a general cleaning of the pedal-assisted bicycle.
- Remove the battery from its seat and turn the key to OFF.
- Leave the bicycle on the stand.
- Protect exposed electrical contacts with antioxidant products.
- Grease all surfaces not protected by paints or anti-corrosion treatments.
Original spare parts
Repairs
6
6