Epson 3880 - Stylus Pro Color Inkjet Printer Manual Jaringan - Halaman 13

Jelajahi secara online atau unduh pdf Manual Jaringan untuk Semua dalam Satu Printer Epson 3880 - Stylus Pro Color Inkjet Printer. Epson 3880 - Stylus Pro Color Inkjet Printer 39 halaman. Printer
Juga untuk Epson 3880 - Stylus Pro Color Inkjet Printer: Brosur (3 halaman), Spesifikasi (2 halaman), Brosur & Spesifikasi (8 halaman), Mulai di sini (2 halaman), Mulai dari Sini Manual (6 halaman), Garansi Terbatas (12 halaman), Panduan Manajemen Warna (47 halaman), Brosur & Spesifikasi (8 halaman), Manual Jaringan (38 halaman), Panduan Memulai Cepat (2 halaman)

3. Check if the following network components are in the list. If they are

already installed, go to "Connecting the Network Interface to the Network"

on page 16.

The following table lists the network components required for configuring

the network interface with EpsonNet Config.

EpsonNet Config's setting screens

TCP/IP, SNMP (IP trap)

The following table lists the network components required for network

printing.

Printing method

LPR printing

4. If the necessary components are not in the list, click Install to install them.

5. Double-click Internet Protocol Version 4 (TCP/IPv4) on the Local Area

Connection Properties dialog box to open the Internet Protocols Version 4

(TCP/IPv4) Properties dialog box. Set the IP address, the subnet mask,

etc. and then click OK.

6. Restart the computer.

The necessary components are now installed. Go to the section "Connecting

the Network Interface to the Network" on page 16.

Necessary components

Internet Protocol (TCP/IP)

Necessary components

Internet Protocol (TCP/IP)

Setting Up Your System for Network Printing