Epson 4000 - Stylus Pro Color Inkjet Printer Panduan Referensi Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Semua dalam Satu Printer Epson 4000 - Stylus Pro Color Inkjet Printer. Epson 4000 - Stylus Pro Color Inkjet Printer 11 halaman. Print engine
Juga untuk Epson 4000 - Stylus Pro Color Inkjet Printer: Brosur & Spesifikasi (4 halaman), Panduan Referensi Produk (38 halaman), Informasi Produk (13 halaman), Mulai dari Sini Manual (6 halaman), Buletin Dukungan Produk (17 halaman), Informasi Penting (2 halaman), Garansi Terbatas (12 halaman), Brosur & Spesifikasi (12 halaman), Brosur & Spesifikasi (6 halaman), Setup Manual (16 halaman)

Loading Paper in the Tray

Make sure the printer is on and roll paper is not loaded

for printing.

Caution:

Heavy media or very glossy media (such

as EPSON Premium Glossy Photo Paper) cannot be

used with the paper tray.

Pull out the paper tray and cover.

Lift up the paper tray cover.

Flip up the paper guide roller and slide the edge

guide all the way to the left.

Thumb through a stack of paper, then gently tap

it on a flat surface to even the pages.

Load the sheets in the portrait orientation, short

edge first, with the printable side face down.

Place the paper all the way back, against the right

side of the tray.

Don't load paper above the arrow mark inside the

edge guide.

Caution:

When you add more paper, always line up

the edges with the paper already in the tray.

Adjust the paper tray and edge guide according

to the paper size. For small sheets, raise the

paper guide and move it to the edge of the stack.

Flip down the paper guide roller, then replace

the paper tray cover and adjust its length.

Note:

Make sure the roll paper support is

not raised.

Press the

Paper Source button until you see

the

cut sheet icon.