ARGENTO Piuma Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Skuter ARGENTO Piuma. ARGENTO Piuma 20 halaman. Electric pedal-assisted cycle

7.3 Checking the parts

The supporting frame of the pedal-assisted bicycle and the welds must be free of

visible defects such as: cracks, deformations, incisions, corrosions, etc.

Make sure that all the bolts and pedals of the pedal-assisted bicycle are

properly tightened.

Check the condition and fastening of the battery, the sheaths of the electric cables

must be in good condition and the terminals must be tight and not corroded.

Check the battery charge status by means of the indicator on the handlebar display.

For a correct use of the battery of your EPAC vehicle it is suggested to

always charge the battery after each use of the bike.

Using the specific inflation valve on the rims, check the tire inflation pressure using

a compressor and a gun with pressure gauge.

Check the condition of the tread, the rim and the fastening of the rims to the hubs.

In case of tire replacement, contact the After-Sales Service or a qualified tire dealer.

Do not change the tension of the spokes: the adjustment must be carried out by

specialized personnel and with suitable means.

The brakes must be adjusted so as to ensure effective braking and at the same

time the control levers must have an adequate stroke to be able to modulate the

braking: in other words, the brakes must be neither too slow nor too tight.