Epson AcuLaser CX11N Operasi Dasar Gude - Halaman 14

Jelajahi secara online atau unduh pdf Operasi Dasar Gude untuk Semua dalam Satu Printer Epson AcuLaser CX11N. Epson AcuLaser CX11N 26 halaman. Multi-function colour laser printers
Juga untuk Epson AcuLaser CX11N: Panduan Pengguna (17 halaman), Spesifikasi (4 halaman), Setup Manual (32 halaman), Mulai dari Sini Manual (8 halaman), Panduan Tambahan (6 halaman), Memperbarui (1 halaman), Buletin Dukungan Produk (5 halaman), Spesifikasi (4 halaman)

Epson AcuLaser CX11N Operasi Dasar Gude
4. Press the u Up or d Down button
several times until your desired group is
selected, then press the r Right button.
The selected group appears in the
second top row in the LCD panel.
Note:
To display the details of the registered group,
press the Advanced/Menu button while
a group is selected. To return to the group
list again, press either the
Advanced/Menu button or the l Left
button.
5. Make the appropriate settings for your
scanning purpose if necessary.
Note:
When you press the x B&W Start button
without making any settings here, the fax
transmission starts with the existing setting
values.
6. Press the x B&W Start button to start the
transmission.
Sending faxes by dialing from a
telephone
When your product has an attached phone,
you can send a fax by dialing from the
phone.
Note:
This function is only available for
black-and-white fax transmissions.
1. Place your original either on the
document table or Auto Document
Feeder. For details, see "Setting your
originals."
2. Dial the number while the attached
phone is on the hook.
3. Press the x B&W Start button after
confirming the recipient to start the fax
transmission.
EPSON AcuLaser CX11 Series Basic Operation Guide

Receiving faxes

Basics of receiving faxes

When the product has an attached phone,
you can select from four reception modes for
receiving a call. The default is set to the Fax
only mode.
Setting item
Description
Auto
The call is received by the
switching
attached phone and the
product automatically answers
after the phone rings for a
certain duration specified by
the Attached Phone Timeout
setting.
Fax only
The product automatically
answers and receives the fax.
Phone only
The call is received by the
attached phone. Fax
reception is not performed.
TAM
When an attached phone
detects a fax/phone signal
while answering an incoming
call, the product automatically
receives the fax.
To change the reception mode, follow the
steps below.
1. Press the
Setup button on the
control panel.
The Setup light is lit and the Setup menu
appears in the LCD panel.
Basic Faxing (Fax Model Only)
14