Ace Amusement Wild West Shoot Out Manual - Halaman 18
Jelajahi secara online atau unduh pdf Manual untuk Mesin Game Arcade Ace Amusement Wild West Shoot Out. Ace Amusement Wild West Shoot Out 20 halaman.
No shock when gun
The Gun Electromagnet or the fuse been damaged
shooting
Pressing
start
key
The start button holder is loose, and the switch
cannot start the game.
line is loose.
The Coin Selector is damaged.
No
response
when
insert coin.
The signal wiring of the Coin Selector is loose.
IO control board is damaged.
The sample coin is not placed well.
Coins are blocked in
The coin slot is not aligned or deformed.
the Coin Selector
The Coin Selector is not assembled properly. The
red braking bar above the Coin Selector is pressed.
Check whether there is signal feedback.
The connected target board is not connected to the
pull-up resistor.
Check whether the token in the Coin Selector is the
The
Coin
Selector
same with that inserted in the Coin Selector.
does not score.
The gear of the switch (normally on and normally
off) is incorrect
The socket outlet of the coin connector is in poor
contact.
Whether the circuit board of the power amplifier is
powered on.
The volume is too low.
The speaker does not
Whether the audio connection port falls off or is
make a sound.
damaged.
The circuit board of the power amplifier goes
wrong.
The speaker goes wrong.
The ticket machine goes wrong or the switch is
No ticket fed.
turned on wrongly.
Shooting
is
not
Check if the potentiometer of the gun is damaged.
accurate.
The ticket machine goes wrong or the switch is
No ticket is out.
turned on wrongly.
Wild West Manual
17
Check and replace if damaged.
The button holder is broken or replaced, the
switch wire is pressed, and the start button
switch is broken or replaced.
Replace Coin Selector.
Check if the signal wiring of the coin selector is
loose.
Replace IO control board.
Please check whether the sample coin is placed
well, or try another sample coin.
Please check whether the coin slot is aligned or
deformed, and adjust coin slot.
Please re-insert it into the Coin Selector.
Please re-connect the Coin Selector. It will
make a sound if there is signal.
Please connect the pull-up resistor.
Please replace it with the proper token.
Please check whether the gear of the switch
(normally on, normally off) is correct.
Please check whether the socket outlet of the
coin connector is in poor contact.
Please turn on the switch of the amplifier circuit
board to power on
Please turn the volume up.
Please re-connect the audio connection port.
Please replace the circuit board.
Please replace the speaker.
Please replace the ticket machine or set the
switch to the factory settings.
Replace the potentiometer and re-align the gun.
Please replace the ticket machine or set the
switch to the factory settings.