Cabelcon CX3 Petunjuk Pengoperasian

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian untuk Peralatan Cabelcon CX3. Cabelcon CX3 1 halaman. All size compression tool

Operating instructions for CX3 All Size Compression Tool

Install the proper plunger tip:

- Plunger A for F short RG6/59

- Plunger B for BNC Male RG5/59

- Plunger C for F & IEC RG 6/59

- Plunger C for F Male RG7/11

2) Turn the tool head to select for RG6/59 sizes or RG7/11 sizes.

3) Prepare the cable and install your Cabelcon CX3 connector on the cable according to instructions.

4) Open the lever arm and insert your connector as shown on picture 2.

5) Close the lever arm until fully closed.

6) Open the lever arm and remove the compressed connector.

Turnable tool head

For RG6/59 sizes

Plunger C

(installed)

COMPRESSION TOOL CX3 ALL SIZE F, BNC & IEC for RG6/7/11/59

Plunger tips kit for 98029072 (see picture 3)

For RG7/11 sizes

Plunger A

Storage of plunger tips

Plunger B

Cabelcon ApS, Industriparken 10, DK 4760 Vordingborg

Tel: +45 55 98 55 99 · Fax: + 45 55 98 55 04

E-mail: [email protected] · www.cabelcon.dk

Picture 3

Picture 2

Compression of a Cabelcon CX3 RG11 connector

98029072-01

98029997

Rev. 160610