Cisco ASR1006 - ASR 1006 Modular Expansion Base Panduan Pemasangan Perangkat Keras - Halaman 32
Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Titik Akses Nirkabel Cisco ASR1006 - ASR 1006 Modular Expansion Base. Cisco ASR1006 - ASR 1006 Modular Expansion Base 47 halaman. Lightweight access points
Juga untuk Cisco ASR1006 - ASR 1006 Modular Expansion Base: Panduan Penyebaran (40 halaman)
Halaman Cetak
for management of the system, extended setup will ask you
to configure each interface on the system
Would you like to enter basic management setup? [yes/no]: n
First, would you like to see the current interface summary? [yes]: y
Any interface listed with OK? value "NO" does not have a valid configuration
Interface
GigabitEthernet0/0/0
GigabitEthernet0/0/1
GigabitEthernet0/0/2
GigabitEthernet0/0/3
GigabitEthernet0
Configuring global parameters:
Enter host name [Router]:
The enable secret is a password used to protect access to
privileged EXEC and configuration modes. This password, after
entered, becomes encrypted in the configuration.
Enter enable secret: test
The enable password is used when you do not specify an
enable secret password, with some older software versions, and
some boot images.
Enter enable password: tests
The virtual terminal password is used to protect
access to the router over a network interface.
Enter virtual terminal password: test
Configure SNMP Network Management? [yes]: n
Configure IP? [yes]: y
Configure RIP routing? [no]:
Configure bridging? [no]:
Configure CLNS? [no]:
Configuring interface parameters:
Do you want to configure GigabitEthernet0/0/0
Do you want to configure GigabitEthernet0/0/1
Do you want to configure GigabitEthernet0/0/2
Do you want to configure GigabitEthernet0/0/3
Do you want to configure GigabitEthernet0
The following configuration command script was created:
hostname Router
enable secret 5 $1$6r./$U5wHcV3uRWkKWK/fap474.
enable password tests
line vty 0 4
password test
no snmp-server
!
ip routing
no bridge 1
no clns routing
!
interface GigabitEthernet0/0/0
shutdown
32
IP-Address
OK? Method Status
unassigned
NO
unset
unassigned
NO
unset
unassigned
NO
unset
unassigned
NO
unset
unassigned
YES unset
interface? [no]: n
down
down
down
down
administratively down down
interface? [yes]: n
interface? [yes]: n
interface? [yes]: n
interface? [yes]: n
Protocol
down
down
down
down