Caberg Just SpeakS Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Sepeda Motor Caberg Just SpeakS. Caberg Just SpeakS 14 halaman. Bluetooth headset & intercom for scooters and motorcycles

Halaman Cetak

JUST SPEAK S

Powering On

Press and hold the (+) Button and the (-) Button at the same time for 1

second to power on. The blue LED turns on and you will hear ascending

beeps and "Hello".

Powering Off

Press the (+) Button and the (-) Button at the same time. The red LED

turns on for about 2 seconds until it turns off completely and you will hear

"Goodbye" and descending beeps.

Charging the Just Speak S

You can charge the Just Speak S by connecting the supplied USB power &

data cable into a computer USB port or USB wall charger. You can use any

standard micro-USB cable to charge the Just Speak S. The LED turns red

while charging, and turns blue when the headset is fully charged. It takes

about 2.5 hours to fully charge.

Note:

1. The USB power & data cable is also used for firmware upgrade of the Just

Speak S.

2. The USB wall charger is not included in the package. Any 3rd party USB charger

can be used with Caberg products if the charger is approved by either FCC,

CE, IC, or other locally approved agencies that Caberg accepts. Please contact

Caberg regarding locally approved agencies Caberg accepts.

JUST SPEAK S

Checking Battery Level

You can check the battery level in two different ways when the headset is

powering on.

LED Indicator

When the headset is powering on, the red LED flashes rapidly indicating

the battery level.

LED

Status

4 flashes

High, 70~100%

3 flashes

Medium, 30~70%

2 flashes

Low, 0~30%

Voice Prompt Indicator

When you power on the headset, keep pressing and holding the (+) Button

and (-) Button simultaneously for about 3 seconds until you hear three high

tone beeps. Then you will hear a voice prompt indicating the battery level.

However, if you release the buttons as soon as the headset turns on, you

will not hear the voice prompt for the battery level.