Epson C11CA18201 - WorkForce 600 Color Inkjet Manual Fungsi - Halaman 23
Jelajahi secara online atau unduh pdf Manual Fungsi untuk Semua dalam Satu Printer Epson C11CA18201 - WorkForce 600 Color Inkjet. Epson C11CA18201 - WorkForce 600 Color Inkjet 28 halaman. Using the control panel for wireless network installation
Juga untuk Epson C11CA18201 - WorkForce 600 Color Inkjet: Panduan Instalasi Jaringan (41 halaman), Informasi Pengaturan Penting (2 halaman), Spesifikasi (2 halaman), Buletin Dukungan Produk (5 halaman)
Halaman Cetak
The printer does not appear in the Add Printer window (Mac OS X)
Make sure the printer driver was installed correctly and that your computer's
TCP/IP settings are configured correctly.
Printing Problems
Cannot print over the network
■
Print a Network Status Sheet (see page 25) and verify that the network
settings are correct.
■
When using TCP/IP, make sure the printer's IP address is set correctly for your
network. If your network does not assign IP addresses using DHCP, you will
need to set the IP address manually.
■
Print a Network Status Sheet (see page 25). If the Link Status says Disconnect,
make sure that the wireless router or access point is turned on and that the
settings are correct for your wireless network.
■
Reset the printer's network settings (see page 26) and perform a first-time
installation of the printer and software (see page 3).
Printing is slow or the print is cut off
Print a Network Status Sheet (see page 25) and check the Signal Condition. If it's
poor, try moving the printer closer to your wireless router or access point. Avoid
placing the printer next to a microwave oven, 2.4 GHz cordless phone, or large
metal object such as a filing cabinet.
A dial-up connection dialog box appears when printing with EpsonNet
Print
If you use a dial-up connection for Internet access, you will see this message every
time you print. Try connecting to the Internet using a LAN connection or set your
dial-up connection to dial manually (Never dial a connection).
Troubleshooting
23