ACU-RITE 02048HD Buku Petunjuk - Halaman 12

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Stasiun Cuaca ACU-RITE 02048HD. ACU-RITE 02048HD 16 halaman.

Troubleshooting

Problem

Display screen

not working

The unit lost power

or batteries were

changed and the

time is not correct

If your AcuRite product does not operate properly after trying

the troubleshooting steps, visit www.AcuRite.com or call

(877) 221-1252 for assistance.

Calibration

The indoor / outdoor temperature and humidity readings, and barometric

pressure can be calibrated on the display unit to improve accuracy. Calibration

can improve accuracy when sensor placement or environmental factors impact

the data accuracy.

1. To access calibration mode, press AND HOLD the "

buttons simultaneously for at least 5 seconds.

2. To adjust the currently selected (flashing) item, press and release the "

or "

" buttons to calibrate the data value higher or lower from the actual

reading.

3. To save your adjustments, press and release the "

next preference. The " " icon will remain illuminated next to calibrated

values.

The preference set order is as follows:

OUTDOOR TEMPERATURE

OUTDOOR HUMIDITY

INDOOR TEMPERATURE

INDOOR HUMIDITY

BAROMETRIC PRESSURE (must be set to MANUAL mode to calibrate)*

• Check that the batteries are installed correctly. Batteries

may need to be replaced.

• Reset the display by pressing the reset button, located on

the back of the display unit. Date and time will need to

be entered after a reset.

• The Intelli-Time battery needs to be replaced (see page

13). Once the new battery is installed, time and date

will need to be set manually.

Possible Solution

", "

" button to adjust the

", and "