Cisco Meraki CW91641-MR Panduan Pemasangan Perangkat Keras - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pemasangan Perangkat Keras untuk Titik Akses Nirkabel Cisco Meraki CW91641-MR. Cisco Meraki CW91641-MR 23 halaman.
Halaman Cetak
3.4
Assigning IP Addresses to CW9166I‐MR, CW9164I‐MRs
All gateway CW9166I‐MR, CW9164I‐MRs (CW9166I‐MR, CW9164I‐MRs with Ethernet connections to the
LAN) must be assigned routable IP addresses. These IP addresses can be dynamically assigned via DHCP
or statically assigned.
3.4.1
Dynamic Assignment
When using DHCP, the DHCP server should be configured to assign a static IP address for each MAC
address belonging to a Meraki AP. Other features of the wireless network such as 802.1x authentication,
may rely on the
property that the APs have static IP addresses.
3.4.2 Static
Assignment
Static IPs are assigned using the local web server on each AP. The following procedure describes how to
set
the static IP:
1. Using a client machine (e.g. a laptop), connect to the AP either wirelessly (by associating to any
SSID
broadcast by the AP) or over a wired connection.
If using a wired connection, connect the client machine to the CW9166I‐MR, CW9164I‐MR either through
a PoE switch or a Meraki PoE Injector. If using a PoE switch, plug an Ethernet cable into the CW9166I‐MR,
CW9164I‐MR's Ethernet jack, and the other end into a PoE switch. Then connect the client machine over
Ethernet cable to the PoE switch. If using a Meraki PoE Injector, connect the CW9166I‐MR, CW9164I‐MR
to the "PoE" port of the Injector, and the client machine to the "LAN" port.
2. Using a web browser on the client machine, access the AP's built‐in web server by
browsing to
http://my.meraki.com. Alternatively, browse to http://10.128.128.128.
3. Click on the "Static IP Configuration" tab. Log in. The default user name is "admin". The default
password is the AP's serial number, with hyphens
4. Configure the static IP address, net mask, gateway IP address and DNS servers that this AP will use
on its
wired connection.
5.
If necessary, reconnect the AP to the LAN.
3.4.3
Static IP via DHCP Reservations
Instead of associating to each Meraki AP individually to configure static IP addresses, an administrator can assign
static IP addresses on the upstream DHCP server. Through "DHCP reservations", IP addresses are "reserved"
for the MAC addresses of the Meraki APs. Please consult the documentation for the DHCP server to configure
DHCP
reservations.
9
included