Cisco Meraki Go GR62 Panduan Instalasi - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Titik Akses Nirkabel Cisco Meraki Go GR62. Cisco Meraki Go GR62 17 halaman.

Halaman Cetak

Choose Your Mounting Location

A good mounting location is important to getting the best performance out of your GR62 access point. Keep the following in mind:

1. The device should have unobstructed line of sight to most coverage areas. For example, if installing in an ofﬁce

ﬁlled with workspaces divided by mid-height cubicle walls, installing on the ceiling or high on a wall would be ideal.

2. Power over Ethernet supports a maximum cable length of 300 ft (100 m).

3. If being used in a mesh deployment, the GR62 should have line of sight to at least two other Meraki devices. A

Cisco Partner can help ensure that your AP placement is ideal.

Mount the GR62

Attach the GR62 to the Mount Cradle

The GR62 attaches to the mount cradle with two tabs on the cradle that insert into the GR62, and is secured to the cradle using one screw.

To attach the GR62 to the mount cradle properly, line up the top edge of the AP with the top tab of the mount cradle. Since the cradle is already mounted to the

wall, guide the GR62 towards the top tab and insert the top tab into the GR62's slot.

Then adjust the GR62 to guide the GR62's bottom slot into the cradle's bottom tab until it clicks into place. Once in place, the GR62 should be secured to the

cradle by using one of the included screws in the cradle's bottom tab.