Cisco Meraki GR10 Panduan Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Titik Akses Nirkabel Cisco Meraki GR10. Cisco Meraki GR10 14 halaman. Dual-band enterprise class 802.11ac cloud-managed access point
Juga untuk Cisco Meraki GR10: Panduan Instalasi (14 halaman)

Halaman Cetak

for your particular organization can be found here.

Assigning IP Addresses to GR10s

All gateway GR10s (GR10s with Ethernet connections to the LAN) must be assigned routable IP addresses. These IP addresses can be dynamically assigned

via DHCP or statically assigned.

Dynamic Assignment

When using DHCP, the DHCP server should be conﬁgured to assign a static IP address for each MAC address belonging to a Meraki AP. Other

features of the wireless network, such as 802.1X authentication, may rely on the property that the APs have static IP addresses.

Static Assignment

Static IPs are assigned using the local web server on each AP. The following procedure describes how to set the static IP:

1. Using a client machine (e.g., a laptop), connect to the AP wirelessly (by associating to any SSID

broadcast by the AP) or over a wired connection.

2. If using a wired connection, connect the client machine to the GR10 either through a PoE switch or a

PoE Injector. If using a PoE switch, plug an Ethernet cable into the GR10's Ethernet jack, and the other

end into a PoE switch. Then connect the client machine over Ethernet cable to the PoE switch. If using a

PoE Injector, connect the GR10 to the "PoE" port of the Injector, and the client machine to the "LAN"

port.

3. Using a web browser on the client machine, access the AP's built-in web server by browsing

to http://my.meraki.com. Alternatively, browse to http://10.128.128.128.

4. Click on the "Uplink Conﬁguration" tab. Log in. The default login is the serial number (e.g. Qxxx-xxxx-

xxxx), with no password (e.g., Q2DD-551C-ZYW3).

5. Conﬁgure the static IP address, net mask, gateway IP address and DNS servers that this AP will use on

its wired connection.

6. If necessary, reconnect the AP to the LAN.

Static IP via DHCP Reservations

Instead of associating to each Meraki AP individually to conﬁgure static IP addresses, an administrator can assign static IP addresses on the upstream

DHCP server. Through "DHCP reservations," IP addresses are "reserved" for the MAC addresses of the Meraki APs. Please consult the documentation

for the DHCP server to conﬁgure DHCP reservations.

Collect Tools

You will need the following tools to perform an installation: