Cisco Meraki MR20 Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Titik Akses Nirkabel Cisco Meraki MR20. Cisco Meraki MR20 12 halaman.

The mount plate has the following features:

Security Features

The MR20 features multiple options for physically securing the access point after installation:

1. Security screw – The accessory kit includes screws that can be used to secure the access point to the mount

cradle. Engaging the security screw prevents accidental dislodging and theft.

The MR20 features a Gigabit Ethernet RJ45 port that accepts 802.3at and 802.3af power (labeled "Eth0, PoE"). This

port should be used for uplink to your WAN connection.

The MR20 access point can be powered using either the Meraki AC Adapter, PoE Injector (both sold separately), or a

third-party PoE switch. The MR20 operates at full power with 802.3af PoE.

If the button is pressed and held for at least ﬁve seconds and then released, the MR20 will reboot and be restored to its

original factory settings by deleting all conﬁguration information stored on the unit.

Your MR20 is equipped with a multi-color LED light on the front of the unit to convey information about system

functionality and performance:

• Orange - AP is booting (permanent Orange suggests hardware issue)