Cisco MERAKI MR66 Panduan Instalasi - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Titik Akses Nirkabel Cisco MERAKI MR66. Cisco MERAKI MR66 20 halaman. Troubleshooting mesh communication between access points
Juga untuk Cisco MERAKI MR66: Manual (7 halaman)
Halaman Cetak
- 1. Package Contents
- 2. Understanding the MR66
- 3. Antennas and Ports
- 4. Pre-Install Preparation
- 5. Power Source Options
- 6. Factory Reset Button
- 7. Led Indicators and Run Dark Mode
- 8. Check and Upgrade Firmware
- 9. Collect Tools
- 10. Collect Additional Hardware for Installation
- 11. Installation Instructions
- 12. Choose Your Mounting Location
- 13. Verify Device Functionality and Test Network Coverage
- 14. Troubleshooting
- 15. Regulatory Information for MR66
The mount plate has the following features:
Antennas and Ports
The Meraki MR66 has two 802.11n radios (the MR62 has one radio). Each radio has two external antenna connectors;
both connectors for a particular radio should be attached to the same type of antenna. The 5 GHz radio is used for mesh
or client communication. The 2.4 GHz radio is primarily used for client communication. However, it can also
communicate with Meraki 2.4 GHz access points. Meraki offers a number of different antennas for use with the MR66.
Alternately, you may purchase 3rd party antennas for use with the MR66. Make sure they have N-type connectors and
support the proper frequency band (2.4 GHz or 5 GHz).
5