Argo ADICS13DC Panduan Petunjuk Instalasi - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Pendingin Udara Argo ADICS13DC. Argo ADICS13DC 19 halaman. Split air conditioner system
Juga untuk Argo ADICS13DC: Panduan Petunjuk Pengoperasian (15 halaman), Panduan Petunjuk Pengoperasian (17 halaman)

Halaman Cetak

19 - REMOTE CONTROLLER: HOW TO CHANGE FROM INFRARED TO WIRED

PREPARE THE REMOTE CONTROLLER

•

Detach the plastic cover of the remote controller terminal block.

•

Open the batteries compartment, remove the batteries and set microswitches 5 and 6 in OFF position.

•

Close the compartment without replacing the batteries (remote controller will be powered by wire).

CONNECTION

Use a tripolar electric shielded wire 0,5mm2, max. length 15m. The wires have not to be lighter than Mod. H05VVC4V5-

K (according to CEI 20-20 CENELEC HD21).

CONNECTING THE REMOTE CONTROLLER TO THE 5 POLES TERMINAL BLOCK INSIDE THE ELECTRICAL

PANEL, AS FOLLOWS:

•

Remove the "bridge" wire between the terminals 2 and 4.

•

Connect the terminal 1 to the bottom terminal of remote control terminal block (+ pole).

•

Connect the terminal 2 to the medium terminal of remote control terminal block (IR).

•

Connect the terminal 3 to the upper terminal of remote control terminal block (- pole).