Cisco WAP150 Panduan Memulai Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Titik Akses Nirkabel Cisco WAP150. Cisco WAP150 13 halaman. Reboot and reset to factory default settings
Juga untuk Cisco WAP150: Manual (4 halaman)
Halaman Cetak
- 1. Before You Begin
- 2. Cisco WAP150 Features
- 3. Mounting the Cisco WAP150
- 4. Wall Mounting
- 5. Placement Tips
- 6. Connecting the Cisco WAP150
- 7. Verifying the Hardware Installation
- 8. Getting Started with the Configuration
- 9. Suggested Next Steps
- 10. Troubleshooting
- 11. Rebooting the Cisco WAP150 or Resetting to Factory Defaults
- 12. Where to Go from here
Welcome
Thank you for choosing the Cisco WAP150 Wireless-AC/N Dual Radio
Access Point with PoE. The Cisco WAP150 is an indoor concurrent dual-
band radio 802.11ac and 802.11n access point with Power over Ethernet
(PoE). -PoE Supplied by UL Listed I.T.E.
This guide provides the general layout of the Cisco WAP150, describe how
to deploy the Cisco WAP150 in your network, and describe how to
configure the Cisco WAP150. For additional information, see
www.cisco.com/go/100_wap_resources.
Package Contents
• Wireless Access Point
• Power Adapter
• This Quick Start Guide
• Ethernet Cable
• Technical Support Contact
• Pointer Card China RoHS
• EU Directives 1999/5/EC Compliance Information (for EU SKU only)
Before You Begin
1
Before you begin the installation, make sure that you have the following
equipment and services:
• A computer with browser support for:
–
Internet Explorer 7.0 or later
–
Chrome 5.0 or later
–
Firefox 3.0 or later
–
Safari 3.0 or later
• Tools for installing the hardware
• FindIt tool for locating the access point
• One or more Ethernet network switches with PoE
• Mobile devices (iPhone, Android, etc.) via wireless setup SSID.
(Configure via Wi-Fi mobile device with a web browser.)
2
Cisco WAP150 Quick Start Guide