digitalview Video Flyer 7" VF-070M Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor digitalview Video Flyer 7" VF-070M. digitalview Video Flyer 7" VF-070M 10 halaman. Self-contained digital video viewing monitor

Halaman Cetak
4
Instructions
CAUTION: Never connect or disconnect parts of the system when the system is powered up
as this may cause serious damage.
1) Setting Up
•
Connect the provided external power supply unit.
•
All the features described in the following points can be set by the DV Studio software.
See DV Studio User Guide for more details.
2) Autoplay, Manual Play at power startup
•
Insert CompactFlash Card containing the captured MPEG files.
•
Turn on the VideoFlyer.
•
Set power switch to ON position. The power LED lights up to confirm power is being
supplied to system.
•
The option of AutoPlay or manual play of tracks at powering up of unit is selected in the
DV Studio software when writing the MPEG files on to CompactFlash Card.
•
In Autoplay mode the first track of the Playlist set in DV Studio will automatically play
after power up.
•
In Manual Play mode after power up press any button and the first track of the Playlist set
in DV Studio will play.
3) Operating modes
There are two operating modes in VideoFlyer – "playlist mode" and "simple play mode"
.
Playlist mode
•
When operating in playlist mode, both project file (*.prj) and playlist file (*.pll) must be
present on the Compact Flash card. These are used to control the sequence for all video
tracks.
•
The project and playlist file are created using DV Studio software. Using this software,
you can set simple sequences or complex sequences including "jump track" or "next
track" actions. The software can also program buttons with different function like "play",
"stop", "pause", "mute", "previous", "next" and "volume".
- 4 -