Cisco WAP571 Panduan Memulai Cepat - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Titik Akses Nirkabel Cisco WAP571. Cisco WAP571 15 halaman. Manually connect access points to the network via power over ethernet (poe)
Juga untuk Cisco WAP571: Manual (4 halaman), Panduan Memulai Cepat (6 halaman)

Halaman Cetak

Enter the default user name of cisco and password of cisco in the

TEP

User Name and Password fields.

Click Login. The Wireless Access Point Setup Wizard appears.

TEP

Follow the Setup Wizard instructions to finish the WAP device

TEP

installation. We strongly recommend that you use the Setup

Wizard for the first installation.The Setup Wizard turns on the Wi-Fi

radio, which allows you to connect wirelessly. For more advanced

configurations, see the Administration Guide. A link to the

Administration Guide is found in

the system light turns on., page

Congratulations, you can now start using your wireless access point.

Suggested Next Steps

Smart PoE

Smart PoE is designed for detecting the power level from the PSE (Power

Sourcing Equipment) side; it does not matter whether 802.3at or 802.3af

mode, the WAP571 will operate at the appropriate mode automatically.

Smart PoE ensures that the WAP571 remains functional once powered by

802.3af PSE, and intelligently to adjust operations below:

• Second Ethernet port disabled

• 2.4-GHz 802.11n radio in 2x2:2 spatial-stream mode

• 5-GHz 802.11ac radio operates without restrictions

In case of an error while installing, try the following troubleshooting

procedures described in this section:

Troubleshooting

If you cannot display the configuration utility, you can test the ability of the

computer to communicate with the device by using ping.

To use ping on a computer running Windows:

Cisco WAP571 Wireless Access Point

Release the Reset button when

11.