Epson EcoTank L6171 Mulai di sini - Halaman 2
Jelajahi secara online atau unduh pdf Mulai di sini untuk Semua dalam Satu Printer Epson EcoTank L6171. Epson EcoTank L6171 4 halaman.
Halaman Cetak
5
When the ink tank is full, remove the ink bottle and
securely close the ink tank cap. Place the remaining ink
aside; you will need it later.
Note:
Replace the bottle cap and tighten it.
6
Repeat the previous steps for the other colors.
7
Close the ink tank cover and then the scanner unit.
8
Connect the power cord to the back of the product and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
9
Raise the control panel, then press the
turn on the product.
Note:
If an error message appears, turn off the product and
check that no protective material has been left inside the product.
10
L6171: Press
or
to select your language on the LCD
screen, then press the OK button.
L6191: Select your language, country, and time.
Follow steps 11 and 12 to continue ink charging.
Note:
You can change these settings later using the product's
control panel. For more information, see the online User's Guide.
11
When the message to see the Start Here sheet appears
on the LCD screen:
L6171: Press the OK button, then press and hold the
help button for 3 seconds.
L6191: Press and hold the
power button to
help button for 3 seconds.
12
When the ink confirmation message appears on the LCD
screen, select Done to start charging the ink. Ink charging
takes approximately 10 minutes. A message appears
when ink charging is complete. Press the OK button to
continue.
Caution:
Do not turn off the product, raise the scanner unit, or
load paper while the product is charging or you'll waste ink.
Note:
After some ink is used for charging, the rest is available
for printing.
13
To complete filling the ink tanks, repeat steps 1 through 6
using the remaining ink in the bottles.
Note:
Replace the bottle cap before disposing of the bottles.
14
Close the ink tank cover and scanner unit.
15
Select Next and follow the on-screen instructions to reset
the ink levels.
16
Follow the on-screen instructions to adjust the print
quality. Press the OK button to continue.
Note:
You can change these settings later using the product's
control panel. For more information, see the online User's Guide.
3
Load paper
See the online User's Guide for information about loading
capacity and available paper types and sizes.
1
Make sure the product is not charging, and then open
the front of the paper cassette and pull out the paper
cassette.
2
Slide the side edge guides all the way out.