Epson Epson Stylus NX330 Petunjuk Penyiapan Cepat - Halaman 3
Jelajahi secara online atau unduh pdf Petunjuk Penyiapan Cepat untuk Semua dalam Satu Printer Epson Epson Stylus NX330. Epson Epson Stylus NX330 4 halaman. Small-in-one print copy scan photo wi-fi
Juga untuk Epson Epson Stylus NX330: Brosur (2 halaman)
Halaman Cetak
6
Install software
Note:
If your computer does not have a CD/DVD drive, you can
download the software from the Epson website. (For more information,
see "Epson technical support.")
Caution:
Be sure to close your other programs, including any screen
savers and virus protection software, before beginning this software
installation.
1
Make sure the printer is NOT CONNECTED to your
computer.
Windows
®
:
If you see a Found New Hardware screen, click
Cancel and disconnect the USB cable. You can't install your
software that way.
2
Insert the product CD.
3
Windows: If you see the AutoPlay window, click Run
Setup.exe. If you see the User Account Control screen,
click Yes or
.
Continue
Double-click the
Mac OS
X:
®
4
Click Install (Windows) or Continue (Mac OS X) and follow
the instructions on your computer screen.
5
When you see the Select Your Connection screen,
check the "Connection options" section on this sheet
for more information. Then click Next (Windows) or
Continue (Mac OS X) and follow the instructions on your
computer screen.
icon, if necessary.
Epson
Connection options
Wireless connection
You must install the software on every computer from which you
want to print. For the fi rst installation, we recommend using a USB
cable (not included) to simplify wireless setup. After the printer is
connected to the network, you will be prompted to remove the
cable.
If you're using Mac OS X 10.6 or 10.7, or you don't have a USB
cable, you will need to use the buttons on the printer to select
wireless settings.
Follow the instructions on your computer screen during software
installation; they will explain how to connect the printer wirelessly
this way.
Make sure you know your network name (SSID) and network
password:
• Network name
• Network password
If you don't have this information, contact the person who set up
your network.
Direct USB connection
Make sure you have a USB cable (not included).
Any problems?
If you experience problems during setup, see below:
Network setup was unsuccessful.
• Make sure you select the right network name.
• If you see a fi rewall alert message, click Unblock or Allow to
let setup continue.
• If your network has security enabled, make sure you enter your
network password (WEP key or WPA passphrase) correctly. If it
has uppercase (ABC) or lowercase (abc) letters, make sure you
enter them correctly.
Press
or
to scroll through characters. Press
between uppercase (ABC), lowercase (abc), or numbers (123).
Press
to move to the next character, and
character.
When you're fi nished, press OK.
The printer's screen is dark.
Press any button to wake your product from sleep mode.
to switch
to delete a