CABINETS TO GO Findley & Myers WD2436 Manual Petunjuk Perakitan - Halaman 2
Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Perabotan Dalam Ruangan CABINETS TO GO Findley & Myers WD2436. CABINETS TO GO Findley & Myers WD2436 7 halaman. Wall diagonal cabinets
Halaman Cetak
►General Instructions:
Thank you for purchasing a Cabinets To Go product. You are now the proud owner of a high quality product designed
to face the test of daily use and guaranteeing your enjoyment for many years to come.
Carefully read the instructions before starting the installation.
During assembly, please follow all generally accepted safety procedures.
Failure to adhere to the following instructions will invalidate the warranty and Cabinets To Go will decline any responsibility for any
damages caused. Any installation which does not correspond to the instructions may result in defects, malfunctioning parts, significant
damage and/or injury.
Before the assembly begins, check that all appropriate and required plumbing and electrical connections exist.
Before drilling, make absolutely sure that there are no pipes (gas, water,electricity, heating, etc.) at the drilling location. Cabinets To Go will
not be held responsible for failure to follow these instructions.
PRIOR TO ASSEMBLY, PLEASE MAKE SURE YOU HAVE ONE FACE FRAME BOX AND ONE CARCASS BOX, WHICH HAVE ALL THE PARTS IN THE
QUANTITIES MENTIONED BELOW. IF YOU ARE MISSING ANY PARTS, PLEASE STOP AND CONTACT CUSTOMER CARE IMMEDIATELY AT 1-800-
CABINET.
► Items Quantity
Item
Description
A
Left Front Side Panel
B
Right Front Side Panel
C
Left Back Side Panel
D
Right Back Side Panel
E
Back Panel
F
Frame & Door
G
Top/Bottom Panels
H
Shelves
Hardware Box
Shelf Clips 8pcs, ST25mm Screw 4pcs, Metal 135° Brackets 4pcs, 1/2" Round Head Screws 8pcs, Bumper 2pcs, ST62mm Screws 8pcs, Wall Anchors 8pcs
► Required tools:
Tools Required: Phillips Screwdriver
Optional Tools: Electric Drill
► Hardware Box:
a
b
c
d
Qty
Q
t
y
Qty
8
4
4
Qty
The materials listing above are for the largest unit in this instruction set. Smaller units may require less hardware and materials;
therefore, your item may contain a smaller number of each.
Optional Tools: Rubber Mallet
e
f
g
Qty
Q
t
y
Q
t
y
8
2
8
8
Page 2
Qty
1
1
1
1
1
1 Set
2
2