Cisco 7821 Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Konferensi Cisco 7821. Cisco 7821 5 halaman. Connaught
Juga untuk Cisco 7821: Catatan Rilis (16 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (18 halaman), Panduan Referensi Cepat (4 halaman), Referensi Cepat (4 halaman), Instalasi Cepat & Panduan Pengguna (12 halaman), Panduan Referensi (11 halaman), Panduan Memulai Cepat (4 halaman), Panduan Pengguna (10 halaman), Manual (27 halaman), Panduan Pengguna (20 halaman), Panduan Referensi Cepat Karyawan (4 halaman), Panduan Utama Migrasi Firmware (31 halaman), Manual (43 halaman), Panduan Memulai Cepat (6 halaman), Kartu Referensi Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Instalasi (39 halaman), Manual (20 halaman), Panduan Konfigurasi Ulang (2 halaman), Panduan Memulai Cepat (7 halaman), Panduan Instalasi Cepat (12 halaman), Panduan Pengguna (27 halaman), Panduan Pengguna (2 halaman), Memulai (2 halaman), Panduan Memulai Cepat (2 halaman)

Cisco 7821 Panduan Pengguna
Place a Call
Enter a number and lift the handset.
OR
Press Redial softkey.
OR
Press New Call, Speaker or Headset
and dial.
Answer a Call
Press the flashing amber button.
OR
Lift the handset.
OR
Press the Speaker or Headset button
or Answer softkey.
Put a Call on Hold
Press Hold.
Resume a Held Call
Press Hold again or Resume softkey.
Call Transfer
To transfer while on an active call:
Press the Transfer button or softkey.
Dial the intended party.
Announce caller when line is picked up.
Press the Transfer button.
Note: If dialed party does not wish to take
the call, press End Call, then resume
original call.
Blind Transfer to Voicemail
▪ Press Dial # + 2-digit site code + 4-digit
extension + Transfer within site
Call Forward
To forward all incoming calls:
Select a line and press Forward all
softkey.
Dial the number.
To forward to voicemail:
Press the Forward ALL softkey.
Press the Messages button.
To receive calls again:
Press the Forward Off softkey again.
Conference
Ad Hoc Conference (Up to 8 Parties)
While on an active call:
Press Conference button.
Dial the intended party, then press the
Call softkey.
When call connects, press Conference
button to connect the calls.
Repeat to add additional parties.
To rejoin conference if party is not
available:
Press EndCall softkey.
Press Resume softkey to be
connected with conference in progress.
View Conference Participants
Press the Show detail softkey.
To refresh the screen, press Update
softkey.
Remove Conference Participants
Press Show Detail softkey.
Highlight the party you wish to remove
using the Navigation button.
Press the Remove softkey.
Add Another Person to a Call
From a connected call that is not on
hold, press Conference.
Select a held call and press Yes.
Decline
Sending an Active or Ringing Call to
Voicemail
To redirect an incoming, ringing call while
on another call:
Highlight the incoming call and press
Decline softkey.
To redirect an incoming call while not on a
call:
Press Decline softkey.
To redirect a held call:
First resume the call and then press
the Decline softkey.
Do Not Disturb (DND)
Press DND softkey to turn on or off the
ringer on the phone.
Directories
Corporate Directory
Press Contacts button.
Select Corporate Directory.
Perform a search by name or extension.
Press Search softkey.
2