Digitana SYNTHI VCS3 Poly MIDI-CV Manual - Halaman 3
Jelajahi secara online atau unduh pdf Manual untuk Konverter Media Digitana SYNTHI VCS3 Poly MIDI-CV. Digitana SYNTHI VCS3 Poly MIDI-CV 11 halaman.
Halaman Cetak
Here is how Midi learn works:
When you toggle the MIDI Learn switch down then back up the midi activity led stays on
and the MCV876 is in Midi Learn mode waiting to receive a MIDI message containing MIDI
channel information. When a message arrives (you play a note on the master keyboard for
example) , the Midi channel number is extracted, compared to the actual interface MIDI
channel and set to this new value if different. If the MIDI channel of the message is identical
to the one configured into the interface, and if the message received is a MIDI note ON
message, the interface extracts the MIDI number of the note played and sets this value as
the reference (base or lowest) note. This allows transpose of the MCV876 to any note on the
keyboard. The reference note is the lowest note the interface can play (digital zero).
Using the small Windows configuration programme available from Marc's website you can
configure the unit to any of the available play modes mode as you desire.
By default the poly midi is configured in Poly Mode 2 with modulation wheel as the midi
CC generating CV3.
V3.06 Firmware and different Play Modes
The Poly Midi unit can be configured in these different play modes, using the windows
configuration programme mcv876v3-04.exe which is available from:-
http://m.bareille.free.fr/mcv876/mcv876.html
(a copy is included on the cd distributed with the poly midi cv unit).
CV1-Gate1 assigned to Note On/Off messages
•
CV2, CV3,CV4* are assignable to controllers, velocity or Pitch Bend..
•
Mono
Gates 2,3,4 are assignable to controllers.
•
One channel recognition
•
CV1/Gate1 and CV2/Gate2 are on channel N - CV1 assignable to MIDI notes
•
Multi2
CV3/Gate3 and CV/Gate4 are on channel N+1 - CV4* assignable to MIDI notes
•
CV1 to CV4*and Gate1 to 4 are respectively on channels N to N+4
•
Multi4
CVs or gates can be assigned to MIDI notes or controllers independently.
•
CV1 +Gate1 and CV2+Gate2 are assigned to Note On/Off messages
•
CV3 and CV4* are assignable to controllers, velocity or Pitch Bend.
•
Poly2
PIC18F2320 only
CV1 to CV4* and Gate1 to 4 are assigned to Note On/Off message
•
Poly4
PIC18F2320 only
*note CV4 is only available on the 4-channel quad midi-cv units.