Epson ET-4550 Mulai di sini - Halaman 2

Jelajahi secara online atau unduh pdf Mulai di sini untuk Semua dalam Satu Printer Epson ET-4550. Epson ET-4550 4 halaman.
Juga untuk Epson ET-4550: Panduan Cepat (17 halaman), Mulai di sini (2 halaman), Mulai di sini (2 halaman)

Halaman Cetak

Carefully seal the bottle using the reverse side of the

bottle tip for proper disposal.

Close the ink tank securely.

Repeat the previous steps for the 3 other Initial bottles.

Close the ink tank unit cover.

Connect the power cord to the back of the product and to

an electrical outlet.

Caution:

Do not connect to your computer yet.

Turn on the product. Select your language, country, date,

and time.

Note:

• You can change these settings later using the product's control

panel. For more information, see the online User's Guide.

• If an error message appears, turn off the product and check

that no protective material has been left inside the product.

When the message to see the setup manual is displayed

on the LCD screen, press and hold the OK button for

3 seconds.

Press one of the

Start buttons to start charging the ink.

Ink charging takes approximately 20 minutes. Ink charging

is complete when the

Note:

After some ink is used for charging, the rest is available for

printing.

Caution:

Do not turn off the product, raise the scanner unit, or

load paper while the product is charging or you'll waste ink.

Load paper

Make sure the product is not charging, and then pull out

the paper cassette.

Slide the side edge guides all the way out and set the

front edge guide to the paper size you are using.

Insert paper with the glossy or printable side down.

Note:

Make sure the paper is loaded against the front edge

guide and not sticking out from the end of the cassette.

3 seconds

power light stops flashing.

20 minutes

LTR