Cisco MCS 7800 Series Panduan Memulai Cepat

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Sistem Konferensi Cisco MCS 7800 Series. Cisco MCS 7800 Series 2 halaman. Multiplatform phones
Juga untuk Cisco MCS 7800 Series: Panduan Memulai Cepat (12 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna Akhir (6 halaman), Panduan Memulai Cepat (2 halaman), Referensi Cepat (2 halaman), Panduan Utama Migrasi Firmware (31 halaman), Manual (43 halaman), Manual (4 halaman), Memulai (6 halaman), Panduan Instalasi (39 halaman), Manual (20 halaman), Panduan Memulai Cepat (2 halaman)

Halaman Cetak
Cisco MCS 7800 Series Panduan Memulai Cepat
Your phone
Cisco IP Phone 7841 shown.
1. Incoming call or voicemail indicator
2. Line and feature buttons
3. Softkeys
4. Navigation
5. Hold, Transfer, and Conference
6. Speakerphone, Headset, and Mute
7. Voicemail, Applications, and Directory
8. Volume
Cisco IP Phone 7800 Series
Multiplatform Phones
Quick Start Guide
Line and feature buttons
Use the line and feature buttons to view calls on
a line, access features such as Speed Dial, and to
perform tasks such as resuming a held call.
Buttons illuminate to indicate status:
•
Green, steady: Line is idle
•
Red, steady: Line in use
•
Red, flashing: Incoming or held call
•
Amber, steady: Line is unregistered
Place a call
Enter a number and pick up the handset.
Answer a call
Press the flashing red line button.
Put a call on hold
1. Press Hold
.
2. To resume a call from hold, press Hold again.
Parking a Call
1.Press transfer key
2.DIal *68
3.Hit call
4.Enter extension where you would like to park the call
5.Press # key
Picking Up a Parked Call
1.Dial *88
2. Hit Call
3. Enter extension where you would like to pick up the
parked call
4.Press # key
View your recent calls
1. Press Applications
.
2. Scroll and select Recents.
3. Select a line to view.
Transfer a call to another person
1. From a call that is not on hold, press Transfer
2. Enter the other person's phone number.
3. Press Transfer again (before or after the party
answers).
Add another person to a call
1. From an active call, press Conference
2. Enter the number you want to join and press Dial.
3. Once the call is connected, press Conference
again.
.
.