Cisco MeetingPlace Audio Server 5.2 Panduan Peningkatan - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Peningkatan untuk Sistem Konferensi Cisco MeetingPlace Audio Server 5.2. Cisco MeetingPlace Audio Server 5.2 20 halaman. Telepresence conference system
Juga untuk Cisco MeetingPlace Audio Server 5.2: Panduan Pengguna (44 halaman), Panduan Memulai (46 halaman)
Halaman Cetak
Required Tools and Equipment
To upgrade to the Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM, you need the following
tools and equipment:
•
•
•
•
•
•
•
How to Upgrade to the Cisco MeetingPlace Audio Server
Release 5.2 DVD-ROM
To upgrade to the Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM, perform the following
procedures in the order shown:
•
•
•
•
•
•
•
•
Saving the License Keys
To save the license keys, perform the following steps:
By using the null-modem cable, connect the laptop to the COM1 service port on the front of the
Step 1
Cisco MeetingPlace 8112.
Through a Telnet session or HyperTerminal, log in as a technician.
Step 2
The tech$ prompt appears.
Insert a blank disk into the floppy disk drive.
Step 3
78-16489-01
Computer with terminal emulation software installed
DB9-female-to-DB9-female null-modem cable
Phillips #2 screwdriver
ESD protection
Small flashlight
Blank diskette
Releasable cable tie
Saving the License Keys, page 3
Powering Down the Cisco MeetingPlace 8112, page 4
Removing the Tape Drive from the Cisco MeetingPlace 8112, page 4
Installing the DVD-ROM Drive into the Cisco MeetingPlace 8112, page 7
Upgrading the Cisco MeetingPlace 8112 BIOS, page 9
Troubleshooting BIOS Upgrade Failure, page 11
Installing the DVD-ROM Drive Software, page 13
Verifying the Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM Upgrade, page 14
Cisco MeetingPlace Audio Server Release 5.2 DVD-ROM Upgrade Procedure
Required Tools and Equipment
3