Cisco MX Series Panduan Memulai - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Sistem Konferensi Cisco MX Series. Cisco MX Series 42 halaman. Telepresence video systems
Juga untuk Cisco MX Series: Panduan Memulai (41 halaman), Panduan Memulai (33 halaman), Panduan Memulai (34 halaman), Panduan Memulai (46 halaman)

Halaman Cetak

Cisco TelePresence Video Systems

Contents

Configuring IP

(when not set by a provisioning system)

Your video conference system supports both iP version 4

(iPv4) and iP version 6 (iPv6). in both cases, the iP param-

eters can be assigned automatically by the network, or you

can set everything manually.

if you want to set the parameters manually, please contact

your network administrator to obtain the required parameters.

if your system is provisioned automatically, these iP settings

may be overridden by the provisioning system.

if an iPv4 or iPv6 address is already assigned to the system, you

will find it in the NetWork section on the System information

page:

tap

Settings (  ) > System Information.

NoTe:

You must restart the system after changing the iP

settings for the changes to take effect

* iP Assignment:

dHCPv6: All iPv6 addresses, including options, are obtained

automatically from a dHCPv6 server.

Autoconf: the system and gateway iP addresses will be assigned

automatically. the options, e.g. NtP and dNS server addresses, must

be set/assigned according to the dHCP options setting. **

Static: the system and gateway iP addresses must be configured

manually. the options, e.g. NtP and dNS server addresses, must be

set/assigned according to the dHCP options setting. **

* dHCP options:

on: the iP parameters, like the dNS and NtP server addresses, will be

obtained automatically from a dHCPv6 server.

off: the iP parameters, like the dNS and NtP server addresses, must

be set manually.

Back to task overview

D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.

Introduction

User interfaces

To set or change the IPv4 settings

Choose IP version

tap

Settings (  ) > Administrator > IP &

IPv4 in the

2. Choose automatic or manual IP assignment

tap DHCP in the

iP assignment; or Static if you want to set the iP addresses

manually.

3. If IP Assignment is Static: Set the IP addresses

enter the

Server

address. A soft keyboard appears when you tap

an input field.

4. Save the settings

tap

Save

saving.

5. Return to the main menu

tap

Exit

to return to the home menu.

Confirguration

Configuration

VLAN. then tap

IP Version

section.

IP Assignment

section if you want automatic

Address,

Subnet

Mask, Gateway, and

to save the changes, or

Undo

to leave without

Appendices

To set or change the IPv6 settings

1. Choose IP version

tap

Settings (  ) > Administrator > IP &

IPv6 in the

IP Version

2. Choose automatic or manual IP assignment

Choose DHCPv6, Autoconf or Static in the

section according to your network requirements.*

3. If IP Assignment is Static: Set the IP addresses

enter the

IP Address

and Gateway. A soft keyboard appears

DNS

when you tap an input field.

4. If IP Assignment is Static or Autoconf:

DHCPoptions

tap on or off in the

DHCP Options

your network requirements.**

if dHCP options are switched off, you must set the dNS

and NtP server addresses on the web interface.

5. Save the settings

tap