Sony 43WD753 Panduan Petunjuk Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk TV Sony 43WD753. Sony 43WD753 40 halaman.

Halaman Cetak

Parts and Controls



CAM (Conditional Access Module)

• Provides access to pay TV services. For

details, refer to the instruction manual

supplied with your CAM.

• Do not insert the smart card directly into

the TV CAM slot. It must be fitted into the

Conditional Access Module provided by

your authorised dealer.

• CAM is not supported in some countries/

areas. Check with your authorised dealer.

• A CAM message may appear when you

switch to a digital programme after using

the Internet video.

  (Power) / + / –

Short press  to turn the TV on.

Long press  until the TV turn off.

When the TV is on,

Volume

Press + or – button to increase/decrease the

volume.

You can also press  until

displayed. Increases/decreases the volume

by pressing the + or – button.

Input

Press  until

notification is displayed.

Moves the selected input source by pressing

+ (up) or – (down) button.

Programme

Press  until PROG notification is displayed.

Select the programme by pressing + (next)

or – (previous) button.

 (Sensors/LED indicator)

• Receives signals from the remote control.

Do not put anything over the sensor.

Doing so may affect its function.

• Lights up in amber when the [Sleep Timer]

or [On Timer] is set (page 25), or the TV is

in Photo Frame Mode (page 16).

• Lights up in white when [Power Saving] is

set to [Picture Off] (page 27).

• Lights up in white when the TV is turned

on.

• Does not light up when the TV is in

standby mode.

• Flashes while the remote control is being

operated.

Note

• Make sure that the TV is completely turned off before

unplugging the AC power cord (mains lead).

• To disconnect the TV from the AC power completely,

pull the plug from the mains socket.

• Please wait for a while when perform input selection

to change to other input.

notification is