Sony BKM-FW50 Panduan Petunjuk Pengoperasian - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk TV Sony BKM-FW50. Sony BKM-FW50 18 halaman. Streaming receiver adaptor
Juga untuk Sony BKM-FW50: Brosur & Spesifikasi (12 halaman), Panduan Petunjuk Pengoperasian (28 halaman), Spesifikasi (2 halaman), Spesifikasi (12 halaman), Brosur (4 halaman), Panduan Petunjuk Pengoperasian (35 halaman)
Halaman Cetak
3
Using the menu of the display, assign
one of the IP addresses that you have
prepared beforehand (the one to be
used for the display control function),
as follows.
4
Press the MENU button on the
display to bring up the main menu.
5
Use the M/m buttons to select
"INITIAL SETUP/INFORMATION"
and press the ENTER button. The
"INITIAL SETUP/INFORMATION"
menu appears.
6
Use the M/m buttons to select "IP
Address Setup" and press the ENTER
button.
7
Use the M/m buttons to select
"Manual" and press the ENTER
button.
8
Enter the necessary items.
1) Use the M/m buttons to select the
item to enter manually and press
the ENTER button. A cursor
appears in the leftmost field of the
selected item.
2) Use the M/m buttons or the
numeric buttons on the remote
control to enter a three-digit
number (0 - 255). When you
press the ENTER button or the
, button, the cursor moves to
the next field on the right. Enter a
number in the same way.
3) When all four fields of an item
have been set, pressing the
ENTER button or the , button
confirms the entry for that item.
4) Make settings for the other items
in the same way.
9
Use the M/m buttons to select
"Execute" and press the ENTER
button.
Next, assign an IP address to the still
image/video playback function.
8
Preparations for Using the Network Functions
Setting an IP address for the still
image/video playback function
1
Start the browser of the computer
(Internet Explorer 6.0 or later).
2
Enter the IP address that was
assigned to the display control
function into the address field, in the
format "http://xxx.xxx.xxx.xxx".
Then press the Enter key on the
keyboard.
When a user name and password
have been set, the "Network
Password" screen appears. Enter the
user name and password that were
set, and then proceed to the next step.
3
Click the "Setup" tab.
The "Setup" screen appears. This
screen lets you set up the Network
Password. The factory default
settings are as follows:
Name:
root
Password: fw50ad
4
Click the "Network" button.
5
Under "Internet Protocol (TCP/IP)",
click "Specify an IP address". Then
enter the IP address for the still
image/video playback function in the
input fields.
6
Click "Apply".
Automatically obtaining an IP
address
If you set up the display as described
below, an IP address can be assigned
automatically by a DHCP server on the
network.
1
Connect the BKM-FW50 installed in
the display to the network, using
suitable LAN cable.
2
Turn power to the display on and
wait for about 30 seconds.