Sony BRAVIA Panduan Petunjuk Pengoperasian - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk TV Sony BRAVIA. Sony BRAVIA 24 halaman. Dlna digital living network alliance
Juga untuk Sony BRAVIA: Spesifikasi (21 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Pengaturan Cepat (2 halaman), Fitur & Spesifikasi (2 halaman), Panduan Pemecahan Masalah (9 halaman), Panduan Referensi (20 halaman), Manual Jaringan (4 halaman), Setup Manual (2 halaman), Setup Manual (2 halaman), Panduan Referensi (44 halaman)

Using the HDMI CONTROL Function for 'BRAVIA' Theatre

Sync

To use 'BRAVIA' Theatre Sync, set the HDMI CONTROL function as explained below.

By connecting Sony components that are compatible with the HDMI CONTROL function with an

HDMI cord (not supplied), operation is simplified as below:

– One-Touch Play: By pressing only H on the unit or remote, the TV turns on and is set for DVD input mode

automatically.

– System Audio Control: While watching TV, you can switch the sound to come out of either the TV or this system's

speakers.

– System Power Off: When you turn the TV off by using the POWER button on the TV's remote, the system turns

off automatically.

HDMI CONTROL is a mutual control function standard used by HDMI CEC (Consumer Electronics

Control) for HDMI (high-definition multimedia interface).

The HDMI CONTROL function will not operate in the following cases:

– When you connect this system to a component which is not correspond with Sony's HDMI CONTROL function.

– A component does not have a HDMI terminal.

We recommend that you connect this system to products featuring 'BRAVIA' Theatre Sync.

Note

• Do not use the THEATRE SYNC button on the remote while the HDMI CONTROL function is active. For details,

see the operating instructions of the system.

• Depending on the connected component, the HDMI CONTROL function may not work. Refer to the operating

instructions supplied with the component.

• When [HDMI CONTROL] is set to [ON] without being connected by the HDMI cord (not supplied), you can not

switch to the TV input mode even if connected by SCART (EURO AV) cord. In this case, turn [HDMI CONTROL]

to [OFF] (European models only).

To use the HDMI CONTROL function, make sure that this system is connected to your TV (which

should be correspond with HDMI CONTROL) by a HDMI cord (not supplied). Turn on the system and

your TV, and then switch the input selector on your TV so that the signal from the system appears on

the TV screen. Then set the respective HDMI CONTROL functions to on.

The following explanation is for this system. For details on TV setting, refer to the operating

instructions supplied with the TV.

Note

• Displayed items vary depending on the country model.

Press "/1.

The system turns on.