Epson L200 Petunjuk

Jelajahi secara online atau unduh pdf Petunjuk untuk Semua dalam Satu Printer Epson L200. Epson L200 4 halaman. Color inkjet printer
Juga untuk Epson L200: Spesifikasi (4 halaman), Panduan Servis (47 halaman), Panduan Pengguna (4 halaman), Mulai di sini (2 halaman), Panduan Pengguna (2 halaman), Pemberitahuan dan Garansi (12 halaman)

L200

Start Here

Read these instructions before using your printer.

This product requires careful handling of ink. Ink may splatter when the ink tanks are

filled or refilled with ink. If ink gets on your clothes or belongings, it may not come off.

Epson recommends that you wear plastic gloves when filling the ink tanks.

Do not open ink bottles until you are ready to fill the ink tanks. Ink bottles are

vacuum packed to maintain reliability.

Remove all protective materials

Fill ink tanks

When you fill the ink tanks, it is recommended that you place a sheet of

paper under the ink tank unit. If ink spills, wipe it off immediately to avoid

permanent stains.

Keep ink bottles out of the reach of children and do not drink the ink.

Extra black ink

For initial setup

Do not pull ink

tubes.

Repeat steps 3 to 6 for each bottle and

corresponding ink tank.

Seal each bottle with stopper. Do not dispose of ink

bottles yet. You will need to enter the codes printed on

each bottle when you install the printer software.

Be sure to set the transportation lock to the

when using the printer, otherwise ink is not delivered and print quality

problems may occur. Set the transortation lock to the

position only when transporting, otherwise ink may leak.

Remove ink tank cap.

Remove only one tank cap

at a time.

Replace bottle cap tightly, or

ink may leak.

Match the ink color with the

correct tank and then fill with ink

up to the upper line on the tank.

Fit ink tank cap securely.

printing position

transport