Cisco MX300 G2 Panduan Memulai - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Sistem Konferensi Cisco MX300 G2. Cisco MX300 G2 46 halaman.
Juga untuk Cisco MX300 G2: Menginstal (7 halaman), Menginstal (7 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman)

Cisco TelePresence Video Systems

Contents

Setting the Administrator settings menu password

When starting up the system for the first time, the Administrator

Settings menu password is not set.

NOTE:

We strongly recommend that you define a password to

protect the Administrator Settings menu, because these settings

affect the behavior of the video conference system.

1. Go to

Home > Settings > Administrator settings > Set menu

password.

On the remote control, press the # key to toggle between

lower or upper case characters and numbers: abc/

ABC/123.

2. Enter the menu password. The password you enter is

hidden; each character is replaced with an asterisk (*).

3. Select

Save

to confirm the changes, or

without saving.

4. Press

Home

(

) to exit.

Back to task overview

D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.

Introduction

User interfaces

Cancel

to leave

Configuration

Getting Started Guide

Appendices

Contacts