Cisco Profile Series Panduan Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Konferensi Cisco Profile Series. Cisco Profile Series 16 halaman. Jbod on the 12g sas modular raid controller
Juga untuk Cisco Profile Series: Panduan Memulai (41 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (7 halaman), Panduan Memulai (35 halaman), Panduan Referensi Cepat (2 halaman), Panduan Instalasi (44 halaman), Panduan Konfigurasi (13 halaman), Lembar Instalasi (2 halaman), Panduan Instalasi (2 halaman), Panduan Memulai Cepat (4 halaman), Panduan Memulai Cepat (4 halaman), Panduan Memulai (32 halaman), Manual (16 halaman), Panduan Memulai (42 halaman), Panduan Memulai (46 halaman)

Chapter 2

Installing the Router

Figure 2-4

Installing the Router to the Wall

Note

For hollow-wall mounting, each bracket requires two wall anchors with washers. Wall anchors and

washers must be size number 10.

Route the cables so that they do not put a strain on the connectors or mounting hardware. To comply with

Step 4

IP 41, cables should be routed down relative to the router to prevent water from traveling on the cables.

Mounting on a Rack

The two brackets provided along with the router which can be used for wall mount or rack mount. These

brackets support mounted the router on a standard 19 inch rack. The brackets must be rotated 90 degrees

and used for mounting it on the rack.

Cisco 800M Series Integrated Services Router Hardware Installation Guide

2-6