Cisco Quick Set C20 Panduan Memulai - Halaman 40

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Sistem Konferensi Cisco Quick Set C20. Cisco Quick Set C20 42 halaman. Tc7.3, english, december 2015
Juga untuk Cisco Quick Set C20: Panduan Memulai (41 halaman), Panduan Pengguna (44 halaman), Panduan Memulai (35 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna (25 halaman), Panduan Pemecahan Masalah (37 halaman), Lembar Instalasi (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Memulai (32 halaman), Panduan Pengguna (48 halaman), Panduan Memulai (42 halaman), Panduan Memulai (46 halaman)

Cisco TelePresence Systems

GettinG started Guide

Table of contents

Introduction

Cisco VCS provisioning for MX and EX Series

When using Cisco VCS (Video Communication Server)

provisioning, a template containing all the settings that can be

provisioned must be uploaded to Cisco TMS (TelePresence

Management System). This is called the Cisco TMS

provisioning configuration template.

All the Advanced Settings for your video system are included

in this template. All settings except

SystemUnit Name

Profile [1..1] URI

can be automatically provisioned to the video

system.

The Advanced Settings are described in the Administrator

guide for your video system. Examples showing either the

default value or an example value are included.

User interfaces

Configuration

Downloading the provisioning configuration template

You can download the templates here:

EX Series:

http://www.cisco.com/en/US/products/ps11327/prod_

release_notes_list.html

and

SIP

MX Series:

http://www.cisco.com/en/US/products/ps11776/prod_

release_notes_list.html

For each software release there is one provisioning

configuration template for every video system model. Take

care to download the correct file.

Appendices

Read the Cisco TMS Provisioning Deployment Guide to find

how to upload the file to Cisco TMS, and how to set the

desired values for the parameters to be provisioned. If not set

by Cisco TMS, the default values will be used.