Cisco Quick Set C20 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Konferensi Cisco Quick Set C20. Cisco Quick Set C20 25 halaman. Tc7.3, english, december 2015
Juga untuk Cisco Quick Set C20: Panduan Memulai (41 halaman), Panduan Pengguna (44 halaman), Panduan Memulai (42 halaman), Panduan Memulai (35 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pemecahan Masalah (37 halaman), Lembar Instalasi (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Memulai (32 halaman), Panduan Pengguna (48 halaman), Panduan Memulai (42 halaman), Panduan Memulai (46 halaman)

Halaman Cetak
Cisco Quick Set C20 Panduan Pengguna
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Getting started

Camera presets

You may create predefined settings of where the camera points and the zoom. This is
referred to as camera presets. See the next page for more.
Do as follows:
1.
Press the
key on the remote control to display the Layout menu. Select Selfview
to be shown as required. In this way you will see what other will see of you in a call.
2.
Press the
key on the remote control to display the Home menu and select
Camera control.
3.
Softbuttons will now appear. Press the Function key corresponding to Camera
presets (Function key number 2 from the left).
4.
To hide the Camera presets, use the same Function key again.
Where to find camera presets
Camera presets
D14582.04
User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, Nov. 2010.
All contents are Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Making calls
Camera settings
Main source
Exit
Phone book usage
In-call features
Using the presets (I)
Camera presets must have been defined before you do this.
key on the remote control to display the Home menu and select
Press the
Camera control. Use the
select a preset. The camera will now move accordingly. Note that this feature may
be used any time.
Sept
20
Using the presets (II)
Camera presets must have been defined before you do this.
Press the
key on the remote control to display the Home menu and select
Camera control. Use the 0~9 keys to select a preset. The camera will now move
accordingly. Note that this feature may be used any time.
10
Advanced settings
CAMERA PRESETS
Pos. 2
Pos. 2
Pos. 2
Pos. 2
Pos. 3
Pos. 3
Add camera preset
Add camera preset
and
Arrow keys to navigate in the menu. Use
User guide
Contact us
CAMERA PRESETS
to
www.cisco.com