Cisco TelePresence Video Systems
Contents
Provisioning set-up
(when using a provisioning system)
if in doubt for any of the parameters below, contact your
provisioning system provider.
See the administrator guide for your product to find more
information about the provisioning settings.
Select provisioning infrastructure
1. Go to
Home > Settings > Administrator settings > Advanced
configuration > Provisioning > Mode
sioning infrastructure:
• tMS – Cisco telePresence Management System
•
Callway – Webex telepresence
•
CuCM – Cisco unified Communications Manager
•
Auto - the system starts provisioning by first trying VCS,
then tMS and finally CuCM.
if you select Off, all configurations must be set manually on
the video system.
Always save the new value when you change a setting
• drop down list selection: Navigate to the correct value
and press the
OK
( )
key to save, or press the left arrow
key
to leave without saving.
• text entry in an input field: enter the text, navigate to
Save
to save the change, or navigate to
without saving; then press the
OK
Back to task overview
D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.
Introduction
User interfaces
Set the required provisioning parameters
Which parameters to set depend on which infrastructure was selected.
TMS
1. Go to
Home > Settings > Administrator settings > Advanced
configuration > Provisioning > ExternalManager.
2. enter the iP address or dNS name of the Cisco tMS server
in the
Address
3. enter the
sponding input
and select a provi-
4. it may be required to authenticate the video system
with Cisco tMS. if so, go back to
LoginName
Webex Telepresence (formerly Callway)
upon ordering the Cisco Webex telepresence service, you
have received a
Please contact your company's Webex telepresence admin-
istrator if you do not have a video phone number and an
activation code.
1. Go to
Home > Settings > Administrator settings > Advanced
configuration > Provisioning
2. enter the Video number in the
3. enter the Activation code in the
Ok/
Cancel
to leave
( ) key
to confirm.
Confirguration
Configuration
input field.*
Path
to the provisioning service in the corre-
field.
Provisioning,
and enter
and
Password
in the respective input fields.
Video number
and an
Activation
code.
LoginName
input
field.
Password
input
field.
18
Getting Started Guide
Appendices
CUCM
1. Go to
Home > Settings > Administrator settings > Advanced
configuration > Provisioning > ExternalManager.
2. enter the iP address or dNS name of the uCM provision-
ing server in the
Address
input field.*
You can find more details about setting up Cisco uCM provi-
sioning in the Administering TC endpoints on CUCM guide.
NoTe:
if you wish to use Secure Mode for CuCM provision-
ing, you must use the web interface.
*
the dHCP server can be set up to provide the external Manager address
automatically (option 242 for tMS; option 150 for uCM). Any input in the
input field overrides the setting provided by dHCP.
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Contacts
Halaman Cetak