Cisco SX80 Panduan Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Konferensi Cisco SX80. Cisco SX80 7 halaman. With touchpad 10
Juga untuk Cisco SX80: Panduan Instalasi (7 halaman), Panduan Referensi Cepat (2 halaman), Manual (45 halaman), Manual (45 halaman), Panduan Pengguna (19 halaman), Panduan Instalasi (24 halaman), Panduan Instalasi (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Referensi (8 halaman), Panduan Memulai (46 halaman)

Halaman Cetak

Installation guide for Cisco TelePresence SX80

About cameras

You can connect cameras, lap tops, and other input sources to the video inputs of the

codec. The codec has three HDMI inputs, a DVI-I input, and an analog input (the DVI-I and

analog inputs cannot be used simultaneously). If you need more inputs, you must add a

video switcher. Cisco provides the following cameras:

You can use any combination of these cameras, as long as only one camera supports

speaker tracking, and the maximum number of cameras does not exceed seven

For more details about the Cisco cameras, refer to camera guides that are available at

https://www.cisco.com/go/telepresence/docs

Connect Cisco Quad Camera

There is a separate installation guide that covers the SX80 with Quad Camera:

Cisco TelePresence SX80 Integrator Package with Quad Camera Installation Guide.

This camera is sold under two names. There is no difference.

Note that Cisco TelePresence SpeakerTrack 60 is composed of two cameras.

Note that the camera surface is hot when the camera is in operation.

Cisco TelePresence SpeakerTrack 60

Based on two Cisco TelePresence Precision 60

cameras and a microphone panel for speaker tracking.

Cisco TelePresence Precision 60

A full HD camera with 1080p60 resolution, 20x total

zoom, and wide angle view.

Cisco TelePresence Precision 40 /

Cisco TelePresence PrecisionHD 1080p 4xS2

A full HD camera with 1080p60 resolution and 4x

optical zoom.

Cisco Quad Camera

A full HD camera with microphones for speaker

tracking, auto-framing capabilities, and integrated

loudspeakers.

Connect Cisco TelePresence SpeakerTrack 60

Power

(100-240 VAC, 50/60 Hz)

Always use the provided

power cable and adapter

(12 V

, minimum 6.5 A).

Right camera

Power

adapter

Connect the two cameras in the

SpeakerTrack 60 assembly to the codec's

and 2

Also connect SpeakerTrack 60 to the

codec's 2

power.

Refer to the installation guide that

comes with SpeakerTrack 60 for further

information about camera assembly and

cabling.

Left camera

camera inputs (HDMI).

or 3

Ethernet port, and to